Handheld fiber laser welding machine

 Tip: Click on the picture to enlarge

Product Description: product description:

The fiber-optic transmission laser welding machine is a laser welding device that couples a high-energy laser beam into an optical fiber, and after long-distance transmission, collimates into parallel light by a collimating mirror, and then focuses on the workpiece to perform welding. For flexible welding non-contact welding, it is more flexible. The optical fiber transmission laser welding machine laser beam can realize time and energy splitting, and can simultaneously process multiple beams, which provides conditions for more precise welding.

Performance characteristics: Features:

1. The optical fiber transmission laser welding machine realizes the flexible output of the laser, and can work independently with the pipeline;

2. The laser welding heat affected zone is small, the heating concentration is rapid, and the thermal stress is low, so the deformation of the welded product is small, and does not affect other properties of the product;

3. The energy is controllable, the output power is stable, and the thin-walled metal is not welded;


4. Focus spot is small, power density is high, and it can weld high melting point and high strength metal and alloy materials;

5. The laser beam energy is adjustable, the moving speed is adjustable, and welding of various materials can be realized;

6. Equipped with high-definition CCD system for real-time monitoring of welds;

7. It can realize automatic welding or semi-automatic welding according to user's requirements, which is easy to operate and greatly saves the labor cost of the user;

8. Can be used with robots


Applications: Applications:

   Optical fiber transmission is easy to achieve automation in the battery industry, IT industry, electronic devices, optical communication industry, sensor industry, hardware industry, auto parts industry, jewelry welding industry, optical industry, porcelain teeth, solar energy industry, electric heating industry\thin wall materials , welding of precision parts, a wide range of applications, can achieve spot welding, butt welding, welding, sealing welding.

技術參數： Technical Parameters:

設備型號 Device Model

CM-HG-FC100

CM-HG-FC150

CM-HG-FC300

CM-HG-FC500

激光波長  Laser wavelength

1064nm

輸出功率  Output Power

100W

150W

300W

500W

最大脈沖能量 Maximum pulse energy

70J

75J

100J

100J

最大峰值功率 Maximum peak power

6KW

6KW

9.9KW

9.9KW

脈沖寬度 Pulse Width

0.5-20.0ms

脈沖重復頻率 Pulse repetition frequency

0-100Hz

單位時間連續脈沖寬度（1秒） Continuous pulse width per unit time (1 sec)

100ms/s

分光方式 Spectroscopic method

能量分光或時間分光

電源升壓控制方式 Power boost control mode

電源升壓使光能量一致，穩定性能好

能量波動性 Energy Volatility

<±1%

能量分光不均勻性 Energy spectral inhomogeneity

<±1%

配套系統 Supporting system

可根據產品加工需求，選用以下配套工作臺系統

振鏡式焊接工作平臺 Galvanometer welding work platform

二軸焊接工作臺 Two-axis welding table

機械手焊接工作臺 Robot welding table

手持式焊槍 Handheld torch

光通信專用工作臺 Optical communication special table

瞄準定位方式 Aimed at targeting

激光二極管紅光指示（CCD選配） Red laser diode indication (CCD optional)

冷卻方式 cooling method

外置冷水機 External Chiller

設備功耗 Power Equipment

4KW

6KW

12KW

20KW

電力要求 Power Requirements

AC380V±15% 50/60 Hz